Kronecker product

For the Kronecker product of representations of symmetric groups, see Kronecker coefficient.

In mathematics, the Kronecker product, sometimes denoted by ⊗, is an operation on two matrices of arbitrary size resulting in a block matrix. It is a specialization of the tensor product (which is denoted by the same symbol) from vectors to matrices and gives the matrix of the tensor product linear map with respect to a standard choice of basis. The Kronecker product is to be distinguished from the usual matrix multiplication, which is an entirely different operation. The Kronecker product is also sometimes called matrix direct product.

The Kronecker product is named after the German mathematician Leopold Kronecker (1823–1891), even though there is little evidence that he was the first to define and use it. The Kronecker product has also been called the Zehfuss matrix, and the Zehfuss product, after Johann Georg Zehfuss, who in 1858 described this matrix operation, but Kronecker product is currently the most widely used term. The misattribution to Kronecker rather than Zehfuss was due to Kurt Hensel.

Definition

If A is an m × n matrix and B is a p × q matrix, then the Kronecker product A ⊗ B is the pm × qn block matrix:

$\mathbf {A} \otimes \mathbf {B} ={\begin{bmatrix}a_{11}\mathbf {B} &\cdots &a_{1n}\mathbf {B} \\\vdots &\ddots &\vdots \\a_{m1}\mathbf {B} &\cdots &a_{mn}\mathbf {B} \end{bmatrix}},$

more explicitly:

${\mathbf {A} \otimes \mathbf {B} }={\begin{bmatrix}a_{11}b_{11}&a_{11}b_{12}&\cdots &a_{11}b_{1q}&\cdots &\cdots &a_{1n}b_{11}&a_{1n}b_{12}&\cdots &a_{1n}b_{1q}\\a_{11}b_{21}&a_{11}b_{22}&\cdots &a_{11}b_{2q}&\cdots &\cdots &a_{1n}b_{21}&a_{1n}b_{22}&\cdots &a_{1n}b_{2q}\\\vdots &\vdots &\ddots &\vdots &&&\vdots &\vdots &\ddots &\vdots \\a_{11}b_{p1}&a_{11}b_{p2}&\cdots &a_{11}b_{pq}&\cdots &\cdots &a_{1n}b_{p1}&a_{1n}b_{p2}&\cdots &a_{1n}b_{pq}\\\vdots &\vdots &&\vdots &\ddots &&\vdots &\vdots &&\vdots \\\vdots &\vdots &&\vdots &&\ddots &\vdots &\vdots &&\vdots \\a_{m1}b_{11}&a_{m1}b_{12}&\cdots &a_{m1}b_{1q}&\cdots &\cdots &a_{mn}b_{11}&a_{mn}b_{12}&\cdots &a_{mn}b_{1q}\\a_{m1}b_{21}&a_{m1}b_{22}&\cdots &a_{m1}b_{2q}&\cdots &\cdots &a_{mn}b_{21}&a_{mn}b_{22}&\cdots &a_{mn}b_{2q}\\\vdots &\vdots &\ddots &\vdots &&&\vdots &\vdots &\ddots &\vdots \\a_{m1}b_{p1}&a_{m1}b_{p2}&\cdots &a_{m1}b_{pq}&\cdots &\cdots &a_{mn}b_{p1}&a_{mn}b_{p2}&\cdots &a_{mn}b_{pq}\end{bmatrix}}.$

Using $/\!/$ and $\%$ to denote truncating integer division and remainder, respectively, and numbering the matrix elements starting from 0, one obtains

$(A\otimes B)_{pr+v,qs+w}=a_{rs}b_{vw}$

$(A\otimes B)_{i,j}=a_{i/\!/p,j/\!/q}b_{i\%p,j\%q}.$

For the usual numbering starting from 1, one obtains

$(A\otimes B)_{p(r-1)+v,q(s-1)+w}=a_{rs}b_{vw}$

$(A\otimes B)_{i,j}=a_{\lceil i/p\rceil ,\lceil j/q\rceil }b_{(i-1)\%p+1,(j-1)\%q+1}.$

If A and B represent linear transformations V₁ → W₁ and V₂ → W₂, respectively, then the tensor product of the two maps is represented by A ⊗ B, which is the same as V₁ ⊗ V₂ → W₁ ⊗ W₂.

Examples

${\begin{bmatrix}1&2\\3&4\\\end{bmatrix}}\otimes {\begin{bmatrix}0&5\\6&7\\\end{bmatrix}}={\begin{bmatrix}1{\begin{bmatrix}0&5\\6&7\\\end{bmatrix}}&2{\begin{bmatrix}0&5\\6&7\\\end{bmatrix}}\\3{\begin{bmatrix}0&5\\6&7\\\end{bmatrix}}&4{\begin{bmatrix}0&5\\6&7\\\end{bmatrix}}\\\end{bmatrix}}=\left[{\begin{array}{cc|cc}1\times 0&1\times 5&2\times 0&2\times 5\\1\times 6&1\times 7&2\times 6&2\times 7\\\hline 3\times 0&3\times 5&4\times 0&4\times 5\\3\times 6&3\times 7&4\times 6&4\times 7\\\end{array}}\right]=\left[{\begin{array}{cc|cc}0&5&0&10\\6&7&12&14\\\hline 0&15&0&20\\18&21&24&28\end{array}}\right].$

Similarly:

${\begin{bmatrix}1&-4&7\\-2&3&3\end{bmatrix}}\otimes {\begin{bmatrix}8&-9&-6&5\\1&-3&-4&7\\2&8&-8&-3\\1&2&-5&-1\end{bmatrix}}=\left[{\begin{array}{cccc|cccc|cccc}8&-9&-6&5&-32&36&24&-20&56&-63&-42&35\\1&-3&-4&7&-4&12&16&-28&7&-21&-28&49\\2&8&-8&-3&-8&-32&32&12&14&56&-56&-21\\1&2&-5&-1&-4&-8&20&4&7&14&-35&-7\\\hline -16&18&12&-10&24&-27&-18&15&24&-27&-18&15\\-2&6&8&-14&3&-9&-12&21&3&-9&-12&21\\-4&-16&16&6&6&24&-24&-9&6&24&-24&-9\\-2&-4&10&2&3&6&-15&-3&3&6&-15&-3\end{array}}\right]$

Properties

Relations to other matrix operations

1. Bilinearity and associativity:

   The Kronecker product is a special case of the tensor product, so it is bilinear and associative:

   ${\begin{aligned}\mathbf {A} \otimes (\mathbf {B} +\mathbf {C} )&=\mathbf {A} \otimes \mathbf {B} +\mathbf {A} \otimes \mathbf {C} ,\\(\mathbf {B} +\mathbf {C} )\otimes \mathbf {A} &=\mathbf {B} \otimes \mathbf {A} +\mathbf {C} \otimes \mathbf {A} ,\\(k\mathbf {A} )\otimes \mathbf {B} &=\mathbf {A} \otimes (k\mathbf {B} )=k(\mathbf {A} \otimes \mathbf {B} ),\\(\mathbf {A} \otimes \mathbf {B} )\otimes \mathbf {C} &=\mathbf {A} \otimes (\mathbf {B} \otimes \mathbf {C} ),\\\mathbf {A} \otimes \mathbf {0} &=\mathbf {0} \otimes \mathbf {A} =\mathbf {0} ,\end{aligned}}$

   where A, B and C are matrices, 0 is a zero matrix, and k is a scalar.
2. Non-commutative:

   In general, A ⊗ B and B ⊗ A are different matrices. However, A ⊗ B and B ⊗ A are permutation equivalent, meaning that there exist permutation matrices P and Q such that

   $\mathbf {B} \otimes \mathbf {A} =\mathbf {P} \,(\mathbf {A} \otimes \mathbf {B} )\,\mathbf {Q} .$

   If A and B are square matrices, then A ⊗ B and B ⊗ A are even permutation similar, meaning that we can take P = Q^T.

   The matrices P and Q are perfect shuffle matrices, called the "commutation" matrix. The Commutation matrix S_p,q can be constructed by taking slices of the I_r identity matrix, where $r=pq$.

   $\mathbf {S} _{p,q}={\begin{bmatrix}\mathbf {I} _{r}(1:q:r,:)\\\mathbf {I} _{r}(2:q:r,:)\\\vdots \\\mathbf {I} _{r}(q:q:r,:)\end{bmatrix}}$

   MATLAB colon notation is used here to indicate submatrices, and I_r is the r × r identity matrix. If $\mathbf {A} \in \mathbb {R} ^{m_{1}\times n_{1}}$ and $\mathbf {B} \in \mathbb {R} ^{m_{2}\times n_{2}}$, then

   $\mathbf {B} \otimes \mathbf {A} =\mathbf {S} _{m_{1},m_{2}}(\mathbf {A} \otimes \mathbf {B} )\mathbf {S} _{n_{1},n_{2}}^{\textsf {T}}$

3. The mixed-product property:

   If A, B, C and D are matrices of such size that one can form the matrix products AC and BD, then

   $(\mathbf {A} \otimes \mathbf {B} )(\mathbf {C} \otimes \mathbf {D} )=(\mathbf {AC} )\otimes (\mathbf {BD} ).$

   This is called the mixed-product property, because it mixes the ordinary matrix product and the Kronecker product.

   As an immediate consequence (again, taking $\mathbf {A} \in \mathbb {R} ^{m_{1}\times n_{1}}$ and $\mathbf {B} \in \mathbb {R} ^{m_{2}\times n_{2}}$),

   $\mathbf {A} \otimes \mathbf {B} =(\mathbf {I} _{m_{1}}\otimes \mathbf {B} )(\mathbf {A} \otimes \mathbf {I} _{n_{2}})=(\mathbf {A} \otimes \mathbf {I} _{m_{2}})(\mathbf {I} _{n_{1}}\otimes \mathbf {B} ).$

   In particular, using the transpose property from below, this means that if

   $\mathbf {A} =\mathbf {Q} \otimes \mathbf {U}$

   and Q and U are orthogonal (or unitary), then A is also orthogonal (resp., unitary).

   The mixed Kronecker matrix-vector product can be written as:

   $\left(\mathbf {A} \otimes \mathbf {B} \right)\operatorname {vec} \left(\mathbf {V} \right)=\operatorname {vec} (\mathbf {B} \mathbf {V} \mathbf {A} ^{T})$

   where $\operatorname {vec} (\mathbf {V} )$ is the vectorization operator applied on $\mathbf {V}$ (formed by reshaping the matrix).
4. Hadamard product (element-wise multiplication):

   The mixed-product property also works for the element-wise product. If A and C are matrices of the same size, B and D are matrices of the same size, then

   $(\mathbf {A} \otimes \mathbf {B} )\circ (\mathbf {C} \otimes \mathbf {D} )=(\mathbf {A} \circ \mathbf {C} )\otimes (\mathbf {B} \circ \mathbf {D} ).$

5. The inverse of a Kronecker product:

   It follows that A ⊗ B is invertible if and only if both A and B are invertible, in which case the inverse is given by

   $(\mathbf {A} \otimes \mathbf {B} )^{-1}=\mathbf {A} ^{-1}\otimes \mathbf {B} ^{-1}.$

   The invertible product property holds for the Moore–Penrose pseudoinverse as well, that is

   $(\mathbf {A} \otimes \mathbf {B} )^{+}=\mathbf {A} ^{+}\otimes \mathbf {B} ^{+}.$

   In the language of Category theory, the mixed-product property of the Kronecker product (and more general tensor product) shows that the category Mat_F of matrices over a field F, is in fact a monoidal category, with objects natural numbers n, morphisms n → m are n×m matrices with entries in F, composition is given by matrix multiplication, identity arrows are simply n × n identity matrices I_n, and the tensor product is given by the Kronecker product.

   Mat_F is a concrete skeleton category for the equivalent category FinVect_F of finite dimensional vector spaces over F, whose objects are such finite dimensional vector spaces V, arrows are F-linear maps L : V → W, and identity arrows are the identity maps of the spaces. The equivalence of categories amounts to simultaneously choosing a basis in every finite-dimensional vector space V over F; matrices' elements represent these mappings with respect to the chosen bases; and likewise the Kronecker product is the representation of the tensor product in the chosen bases.
6. Transpose:

   Transposition and conjugate transposition are distributive over the Kronecker product:

   $(\mathbf {A} \otimes \mathbf {B} )^{\textsf {T}}=\mathbf {A} ^{\textsf {T}}\otimes \mathbf {B} ^{\textsf {T}}$ and $(\mathbf {A} \otimes \mathbf {B} )^{*}=\mathbf {A} ^{*}\otimes \mathbf {B} ^{*}.$

7. Determinant:

   Let A be an n × n matrix and let B be an m × m matrix. Then

   $\left|\mathbf {A} \otimes \mathbf {B} \right|=\left|\mathbf {A} \right|^{m}\left|\mathbf {B} \right|^{n}.$

   The exponent in |A| is the order of B and the exponent in |B| is the order of A.
8. Kronecker sum and exponentiation:

   If A is n × n, B is m × m and I_k denotes the k × k identity matrix then we can define what is sometimes called the Kronecker sum, ⊕, by

   $\mathbf {A} \oplus \mathbf {B} =\mathbf {A} \otimes \mathbf {I} _{m}+\mathbf {I} _{n}\otimes \mathbf {B} .$

   This is different from the direct sum of two matrices. This operation is related to the tensor product on Lie algebras, as detailed below (#Abstract properties) in the point "Relation to the abstract tensor product".

   We have the following formula for the matrix exponential, which is useful in some numerical evaluations.

   $\exp({\mathbf {N} \oplus \mathbf {M} })=\exp(\mathbf {N} )\otimes \exp(\mathbf {M} )$

   Kronecker sums appear naturally in physics when considering ensembles of non-interacting systems. Let H^k be the Hamiltonian of the kth such system. Then the total Hamiltonian of the ensemble is

   $H_{\operatorname {Tot} }=\bigoplus _{k}H^{k}.$

9. Vectorization of a Kronecker product:

   Let $A$ be an $m\times n$ matrix and $B$ a $p\times q$ matrix. When the order of the Kronecker product and vectorization is interchanged, the two operations can be linked linearly through a function that involves the commutation matrix, $K_{qm}$. That is, $\operatorname {vec} (\operatorname {Kron} (A,B))$ and $\operatorname {Kron} (\operatorname {vec} A,\operatorname {vec} B)$ have the following relationship:

   $\operatorname {vec} (A\otimes B)=(I_{n}\otimes K_{qm}\otimes I_{p})(\operatorname {vec} A\otimes \operatorname {vec} B).$

   Furthermore, the above relation can be rearranged in terms of either $\operatorname {vec} A$ or $\operatorname {vec} B$ as follows:

   $\operatorname {vec} (A\otimes B)=(I_{n}\otimes G)\operatorname {vec} A=(H\otimes I_{p})\operatorname {vec} B,$

   where

   $G=(K_{qm}\otimes I_{p})(I_{m}\otimes \operatorname {vec} B){\text{ and }}H=(I_{n}\otimes K_{qm})(\operatorname {vec} A\otimes I_{q}).$

10. Outer Product:
    If $x\in \mathbb {R} ^{n}$ and $y\in \mathbb {R} ^{m}$ are arbitrary vectors, then the outer product between $x$ and $y$ is defined as $xy^{T}$. The Kronecker product is related to the outer product by: $y\otimes x=\operatorname {vec} (xy^{T})$.

Abstract properties

1. Spectrum:

   Suppose that A and B are square matrices of size n and m respectively. Let λ₁, ..., λ_n be the eigenvalues of A and μ₁, ..., μ_m be those of B (listed according to multiplicity). Then the eigenvalues of A ⊗ B are

   $\lambda _{i}\mu _{j},\qquad i=1,\ldots ,n,\,j=1,\ldots ,m.$

   It follows that the trace and determinant of a Kronecker product are given by

   $\operatorname {tr} (\mathbf {A} \otimes \mathbf {B} )=\operatorname {tr} \mathbf {A} \,\operatorname {tr} \mathbf {B} \quad {\text{and}}\quad \det(\mathbf {A} \otimes \mathbf {B} )=(\det \mathbf {A} )^{m}(\det \mathbf {B} )^{n}.$

2. Singular values:

   If A and B are rectangular matrices, then one can consider their singular values. Suppose that A has r_A nonzero singular values, namely

   $\sigma _{\mathbf {A} ,i},\qquad i=1,\ldots ,r_{\mathbf {A} }.$

   Similarly, denote the nonzero singular values of B by

   $\sigma _{\mathbf {B} ,i},\qquad i=1,\ldots ,r_{\mathbf {B} }.$

   Then the Kronecker product A ⊗ B has r_Ar_B nonzero singular values, namely

   $\sigma _{\mathbf {A} ,i}\sigma _{\mathbf {B} ,j},\qquad i=1,\ldots ,r_{\mathbf {A} },\,j=1,\ldots ,r_{\mathbf {B} }.$

   Since the rank of a matrix equals the number of nonzero singular values, we find that

   $\operatorname {rank} (\mathbf {A} \otimes \mathbf {B} )=\operatorname {rank} \mathbf {A} \,\operatorname {rank} \mathbf {B} .$

3. Relation to the abstract tensor product:

   The Kronecker product of matrices corresponds to the abstract tensor product of linear maps. Specifically, if the vector spaces V, W, X, and Y have bases {v₁, ..., v_m}, {w₁, ..., w_n}, {x₁, ..., x_d}, and {y₁, ..., y_e}, respectively, and if the matrices A and B represent the linear transformations S : V → X and T : W → Y, respectively in the appropriate bases, then the matrix A ⊗ B represents the tensor product of the two maps, S ⊗ T : V ⊗ W → X ⊗ Y with respect to the basis {v₁ ⊗ w₁, v₁ ⊗ w₂, ..., v₂ ⊗ w₁, ..., v_m ⊗ w_n} of V ⊗ W and the similarly defined basis of X ⊗ Y with the property that A ⊗ B(v_i ⊗ w_j) = (Av_i) ⊗ (Bw_j), where i and j are integers in the proper range.

   When V and W are Lie algebras, and S : V → V and T : W → W are Lie algebra homomorphisms, the Kronecker sum of A and B represents the induced Lie algebra homomorphisms V ⊗ W → V ⊗ W.
4. Relation to products of graphs:
   The Kronecker product of the adjacency matrices of two graphs is the adjacency matrix of the tensor product graph. The Kronecker sum of the adjacency matrices of two graphs is the adjacency matrix of the Cartesian product graph.

Matrix equations

The Kronecker product can be used to get a convenient representation for some matrix equations. Consider for instance the equation AXB = C, where A, B and C are given matrices and the matrix X is the unknown. We can use the "vec trick" to rewrite this equation as

$\left(\mathbf {B} ^{\textsf {T}}\otimes \mathbf {A} \right)\,\operatorname {vec} (\mathbf {X} )=\operatorname {vec} (\mathbf {AXB} )=\operatorname {vec} (\mathbf {C} ).$

Here, vec(X) denotes the vectorization of the matrix X, formed by stacking the columns of X into a single column vector.

It now follows from the properties of the Kronecker product that the equation AXB = C has a unique solution, if and only if A and B are invertible (Horn & Johnson 1991, Lemma 4.3.1).

If X and C are row-ordered into the column vectors u and v, respectively, then (Jain 1989, 2.8 Block Matrices and Kronecker Products)

$\mathbf {v} =\left(\mathbf {A} \otimes \mathbf {B} ^{\textsf {T}}\right)\mathbf {u} .$

The reason is that

$\mathbf {v} =\operatorname {vec} \left((\mathbf {AXB} )^{\textsf {T}}\right)=\operatorname {vec} \left(\mathbf {B} ^{\textsf {T}}\mathbf {X} ^{\textsf {T}}\mathbf {A} ^{\textsf {T}}\right)=\left(\mathbf {A} \otimes \mathbf {B} ^{\textsf {T}}\right)\operatorname {vec} \left(\mathbf {X^{\textsf {T}}} \right)=\left(\mathbf {A} \otimes \mathbf {B} ^{\textsf {T}}\right)\mathbf {u} .$

Applications

For an example of the application of this formula, see the article on the Lyapunov equation. This formula also comes in handy in showing that the matrix normal distribution is a special case of the multivariate normal distribution. This formula is also useful for representing 2D image processing operations in matrix-vector form.

Another example is when a matrix can be factored as a Kronecker product, then matrix multiplication can be performed faster by using the above formula. This can be applied recursively, as done in the radix-2 FFT and the Fast Walsh–Hadamard transform. Splitting a known matrix into the Kronecker product of two smaller matrices is known as the "nearest Kronecker product" problem, and can be solved exactly by using the SVD. To split a matrix into the Kronecker product of more than two matrices, in an optimal fashion, is a difficult problem and the subject of ongoing research; some authors cast it as a tensor decomposition problem.

In conjunction with the least squares method, the Kronecker product can be used as an accurate solution to the hand–eye calibration problem.

Related matrix operations

Two related matrix operations are the Tracy–Singh and Khatri–Rao products, which operate on partitioned matrices. Let the m × n matrix A be partitioned into the m_i × n_j blocks A_ij and p × q matrix B into the p_k × q_ℓ blocks B_kl, with of course Σ_i m_i = m, Σ_j n_j = n, Σ_k p_k = p and Σ_ℓ q_ℓ = q.

Tracy–Singh product

The Tracy–Singh product is defined as

$\mathbf {A} \circ \mathbf {B} =\left(\mathbf {A} _{ij}\circ \mathbf {B} \right)_{ij}=\left(\left(\mathbf {A} _{ij}\otimes \mathbf {B} _{kl}\right)_{kl}\right)_{ij}$

which means that the (ij)-th subblock of the mp × nq product A $\circ$ B is the m_i p × n_j q matrix A_ij $\circ$ B, of which the (kℓ)-th subblock equals the m_i p_k × n_j q_ℓ matrix A_ij ⊗ B_kℓ. Essentially the Tracy–Singh product is the pairwise Kronecker product for each pair of partitions in the two matrices.

For example, if A and B both are 2 × 2 partitioned matrices e.g.:

$\mathbf {A} =\left[{\begin{array}{c | c}\mathbf {A} _{11}&\mathbf {A} _{12}\\\hline \mathbf {A} _{21}&\mathbf {A} _{22}\end{array}}\right]=\left[{\begin{array}{c c | c}1&2&3\\4&5&6\\\hline 7&8&9\end{array}}\right],\quad \mathbf {B} =\left[{\begin{array}{c | c}\mathbf {B} _{11}&\mathbf {B} _{12}\\\hline \mathbf {B} _{21}&\mathbf {B} _{22}\end{array}}\right]=\left[{\begin{array}{c | c c}1&4&7\\\hline 2&5&8\\3&6&9\end{array}}\right],$

we get:

${\begin{aligned}\mathbf {A} \circ \mathbf {B} ={}&\left[{\begin{array}{c | c}\mathbf {A} _{11}\circ \mathbf {B} &\mathbf {A} _{12}\circ \mathbf {B} \\\hline \mathbf {A} _{21}\circ \mathbf {B} &\mathbf {A} _{22}\circ \mathbf {B} \end{array}}\right]\\={}&\left[{\begin{array}{c | c | c | c}\mathbf {A} _{11}\otimes \mathbf {B} _{11}&\mathbf {A} _{11}\otimes \mathbf {B} _{12}&\mathbf {A} _{12}\otimes \mathbf {B} _{11}&\mathbf {A} _{12}\otimes \mathbf {B} _{12}\\\hline \mathbf {A} _{11}\otimes \mathbf {B} _{21}&\mathbf {A} _{11}\otimes \mathbf {B} _{22}&\mathbf {A} _{12}\otimes \mathbf {B} _{21}&\mathbf {A} _{12}\otimes \mathbf {B} _{22}\\\hline \mathbf {A} _{21}\otimes \mathbf {B} _{11}&\mathbf {A} _{21}\otimes \mathbf {B} _{12}&\mathbf {A} _{22}\otimes \mathbf {B} _{11}&\mathbf {A} _{22}\otimes \mathbf {B} _{12}\\\hline \mathbf {A} _{21}\otimes \mathbf {B} _{21}&\mathbf {A} _{21}\otimes \mathbf {B} _{22}&\mathbf {A} _{22}\otimes \mathbf {B} _{21}&\mathbf {A} _{22}\otimes \mathbf {B} _{22}\end{array}}\right]\\={}&\left[{\begin{array}{c c | c c c c | c | c c}1&2&4&7&8&14&3&12&21\\4&5&16&28&20&35&6&24&42\\\hline 2&4&5&8&10&16&6&15&24\\3&6&6&9&12&18&9&18&27\\8&10&20&32&25&40&12&30&48\\12&15&24&36&30&45&18&36&54\\\hline 7&8&28&49&32&56&9&36&63\\\hline 14&16&35&56&40&64&18&45&72\\21&24&42&63&48&72&27&54&81\end{array}}\right].\end{aligned}}$

Khatri–Rao product

Main article: Khatri–Rao product

• Block Kronecker product
• Column-wise Khatri–Rao product

Face-splitting product

Main article: Khatri–Rao product

Mixed-products properties

$\mathbf {A} \otimes (\mathbf {B} \bullet \mathbf {C} )=(\mathbf {A} \otimes \mathbf {B} )\bullet \mathbf {C} ,$

where $\bullet$ denotes the Face-splitting product.

$(\mathbf {A} \bullet \mathbf {B} )(\mathbf {C} \otimes \mathbf {D} )=(\mathbf {A} \mathbf {C} )\bullet (\mathbf {B} \mathbf {D} ),$

Similarly:

$(\mathbf {A} \bullet \mathbf {L} )(\mathbf {B} \otimes \mathbf {M} )\cdots (\mathbf {C} \otimes \mathbf {S} )=(\mathbf {A} \mathbf {B} \cdots \mathbf {C} )\bullet (\mathbf {L} \mathbf {M} \cdots \mathbf {S} ),$

$\mathbf {c} ^{\textsf {T}}\bullet \mathbf {d} ^{\textsf {T}}=\mathbf {c} ^{\textsf {T}}\otimes \mathbf {d} ^{\textsf {T}},$

where $\mathbf {c}$ and $\mathbf {d}$ are vectors,

$(\mathbf {A} \bullet \mathbf {B} )(\mathbf {c} \otimes \mathbf {d} )=(\mathbf {A} \mathbf {c} )\circ (\mathbf {B} \mathbf {d} ),$

where $\mathbf {c}$ and $\mathbf {d}$ are vectors, and $\circ$ denotes the Hadamard product.

Similarly:

$(\mathbf {A} \bullet \mathbf {B} )(\mathbf {M} \mathbf {N} \mathbf {c} \otimes \mathbf {Q} \mathbf {P} \mathbf {d} )=(\mathbf {A} \mathbf {M} \mathbf {N} \mathbf {c} )\circ (\mathbf {B} \mathbf {Q} \mathbf {P} \mathbf {d} ),$

${\mathcal {F}}(C^{(1)}x\star C^{(2)}y)=({\mathcal {F}}C^{(1)}\bullet {\mathcal {F}}C^{(2)})(x\otimes y)={\mathcal {F}}C^{(1)}x\circ {\mathcal {F}}C^{(2)}y,$

where $\star$ is vector convolution and ${\mathcal {F}}$ is the Fourier transform matrix (this result is an evolving of count sketch properties),

$(\mathbf {A} \bullet \mathbf {L} )(\mathbf {B} \otimes \mathbf {M} )\cdots (\mathbf {C} \otimes \mathbf {S} )(\mathbf {K} \ast \mathbf {T} )=(\mathbf {A} \mathbf {B} \cdot \mathbf {C} \mathbf {K} )\circ (\mathbf {L} \mathbf {M} \cdots \mathbf {S} \mathbf {T} ),$

where $\ast$ denotes the column-wise Khatri–Rao product.

Similarly:

$(\mathbf {A} \bullet \mathbf {L} )(\mathbf {B} \otimes \mathbf {M} )\cdots (\mathbf {C} \otimes \mathbf {S} )(c\otimes d)=(\mathbf {A} \mathbf {B} \cdots \mathbf {C} \mathbf {c} )\circ (\mathbf {L} \mathbf {M} \cdots \mathbf {S} \mathbf {d} ),$

$(\mathbf {A} \bullet \mathbf {L} )(\mathbf {B} \otimes \mathbf {M} )\cdots (\mathbf {C} \otimes \mathbf {S} )(\mathbf {P} \mathbf {c} \otimes \mathbf {Q} \mathbf {d} )=(\mathbf {A} \mathbf {B} \cdots \mathbf {C} \mathbf {P} \mathbf {c} )\circ (\mathbf {L} \mathbf {M} \cdots \mathbf {S} \mathbf {Q} \mathbf {d} ),$

where $\mathbf {c}$ and $\mathbf {d}$ are vectors.

See also

• Generalized linear array model
• Hadamard product (matrices)
• Kronecker coefficient

References

• Horn, Roger A.; Johnson, Charles R. (1991). Topics in Matrix Analysis. Cambridge University Press. ISBN 978-0-521-46713-1.
• Jain, Anil K. (1989). Fundamentals of Digital Image Processing. Prentice Hall. Bibcode:1989fdip.book.....J. ISBN 978-0-13-336165-0.
• Steeb, Willi-Hans (1997). Matrix Calculus and Kronecker Product with Applications and C++ Programs. World Scientific Publishing. ISBN 978-981-02-3241-2.
• Steeb, Willi-Hans (2006). Problems and Solutions in Introductory and Advanced Matrix Calculus. World Scientific Publishing. ISBN 978-981-256-916-5.
• Liu, Shuangzhe; Trenkler, Götz (2008), "Hadamard, Khatri-Rao, Kronecker and other matrix products", International Journal of Information and Systems Sciences, 4: 160–177

External links

• "Tensor product", Encyclopedia of Mathematics, EMS Press, 2001 [1994]
• "Kronecker product". PlanetMath.
• "Kronecker product". MathWorld.
• "New Kronecker product problems" (PDF).
• "Earliest uses". The entry on the Kronecker, Zehfuss, or Direct Product of matrices has historical information.
• calculate Kronecker product of two matrices. SourceForge (generic C++ and Fortran 90 source code). 2015-06-27.
• "Kronecker product". RosettaCode.org. 31 December 2020. Retrieved 2021-01-13. Software source in more than 40 languages.